How to Move a Hot Tub

How to Move a Hot Tub
October 29, 2019

Moving a hot tub may require careful planning, but it doesn’t have to be difficult. Perhaps surprisingly, the most challenging part of moving a spa or hot tub isn’t actually moving it, but rather disassembling and reassembling it in its new location.

In this detailed guide, we’ll walk you through every step of the spa-transportation process–from outlining the best way to move a hot tub to recommending tools you’ll need for the job.

How to Move a Hot Tub: Equipment and Tools

You’ll need some manpower when moving a spa. At a minimum, you’ll want at least four able-bodied people to help.

You’ll also need some tools. Some of the basic equipment that’s used when moving a hot tub include:

  • tow straps
  • four pieces of 4×4 lumber
  • two four-wheeled furniture dollies

If you plan on moving the hot tub offsite, you’ll need to arrange transportation with enough space to fit the hot tub, such as a u-haul, penske rental, or a large flatbed or truck.

Before you begin, measure the hot tub and any entryways it will need to pass through on its way to its new home. Clear the path before you begin, ensuring a smooth, safe, and speedy transportation process.

Once you have your tools in place, you’ll be ready to start moving your hot tub.

The best way to move a hot tub

Short of hiring a professional team to help, the best way to move a hot tub is carefully. Plan ahead, be strategic, and move slowly. Moving a spa isn’t something you want to rush, because you could damage the hot tub or worse, hurt yourself or someone else. Below is a step-by-step guide to how to move a hot tub.

Step 1: disconnect the hot tub from the grid
Before moving the spa, you need to turn off the power supply. Unplug it and wind the cable neatly, wrapping it in plastic wrap. Tuck it away so that it doesn’t swing while you move the unit.

Step 2: drain the hot tub
Next, drain the hot tub according to the manufacturer’s recommendations. After draining it, wipe until no surface moisture remains.

If you live in an urban area, your city might have rules about discarding large amounts of residential water. You might need to route the water into your garden or lawn instead of sending it down the drain. A quick google search should give you all the info you need.

Step 3: remove accessories and other components
Remove or minimize anything hanging off of the unit before moving it. This may include screws or nails. Store these somewhere safe for when you reinstall the hot tub later.

Once the hot tub is fully disconnected from its base, you are ready to lift it.

Step 4: lifting the hot tub
Gather the team and ready the lumber. Elevate the unit one side at a time, resting each side on the four pieces of wood as you go. The hot tub should sit four inches off the ground when all four sides are resting on the lumber.

Step 5: moving the hot tub
Using the two furniture dollies, slide one underneath the front and the other one underneath the back. Secure the spa with the tow straps.

Roll the hot tub toward the truck.

Step 6: load the hot tub into the truck
Use the lift or ramp to load the hot tub into the truck. Then secure it carefully.

If you have a porch, use a small ramp to maneuver over steps in the way. For a hot tub on the second story of a house, we recommend using a professional team instead of trying to move it yourself.

Step 7: unloading and installation
After you’ve reached your destination, follow these steps in reverse. Once the unit has arrived at its new home, simply reinstall it. Job well-done.

Why moving a hot tub is so difficult

Moving any large appliance or piece of furniture is not only a hassle, but it can also be dangerous. Our advice is to save yourself the trouble and hire a professional moving team.

For more advice on how to move a hot tub or to get a free quote, contact the passionate professionals at colonial van lines today.


Moving in Winter: How to Prepare
Truck Rental 101 for Your DIY Move